528 Customs Goon 25mm RDA Review

528 Customs Goon 25mm RDA

Hey guys, Nick discount vape pen. And today we’re going to give you a review of the 528 goon 25 millimeter.

All right guys, three is going to be an exciting one.  We’ve been getting a lot of requests lately to do a review on the goon 528 customs. This is going to be the 25 millimeter version, so it’s their newest release and you can see we got it right here. This is going to be in the black and it just see man, this thing is beautiful. You have a massive posts right here.  I don’t know how well the camera’s picking that up, but you got a serial number engraved in every deck uniquely, which is really cool.  You got goon right there on the posts, on both sides, and then a nice little 528 logo on the inlay in there and then a really cool feature of this guy is the entire inside of it is going to be Delrin.

I don’t know if you could see that, but that whole inner top cap is Delrin. And now what that’s going to do for you and your vaping experience is going to mean it’s going to reduce a lot of the heat. This top cap stays really cool because it’s not as much metal. You know, almost half as less metal, than most RDA’s on the top cap, but that Delrin keeps it nice and cool. Now one thing you’ll see inside the packaging that it comes with, which is really nice is you do get some awesome extras. You can see here we get a whole set of Phillips head screws right there. You can see the Phillips head, installed by default. You have a Starkey. So that’s going to be on your preference. There’s really no right or wrong answer.

I personally would probably prefer the Phillips head screws. But the other cool thing you’re going to get inside here is going to be a Squonk pin. Pull it out just so that you can make this guy’s squonk compatible, which is how I prefer to run mine or any goon really, and you can see right there that just goes right into the bottom and then you’re good for squonk mode. And the Nice thing about the goon is great squonker because, the way the deck set, you can build a really nice wall for the cotton and that will allow the liquid to just basically flow out towards the coil and not really bunch up and come out The sides are out the up hole in the middle of the cotton on the top. And you can see we have a nice pin right there. If you’re not going to squonk. And I just want to show you guys how high these screws go, how big these clamps can open up. It’s actually pretty impressive. The whole design behind these RDa’s, is going to be if you have a piece of wire that you made that is just out of this world and you can’t fit into anything, the goon is definitely going to fit that.

It’s definitely enough. See, we’ll open up these screw holes. They just go forever. This is actually going to take a little while, but its impressive man. This is great RDA even just get it by finger. Now it being a 25 millimeters is also going to allow you to house a whole bunch of coils that not many other RDAs on the market will. And you can see these aren’t even all the way out. They still have more room. But I mean look at that. There’s no wire that you’re not going to fit inside that guy and it’s very easy to trim the leads on the opposite side. You know, you could even run sleeper builds on this pretty easily, which is one piece of wire crossing through both sections. It’s just a really customizable RDA. The other nice thing is going to be the airflow.  You could adjust for a single coil. You could adjust for dual coil, you could do in between airflow is going to be really, really, really customizable. Almost going back to the v one style.

You can see you’ve got a really nice engraving for the goon logo there. Beautiful. Now I just want to show you mine because we don’t want to build up the store display. But here you go. I have the silver one and you can see these are some massive transformer coils.  If you’re not sure what that means, transformers are going to be two Clapton’s. They’re a fused together again in a piece of flat wire and it’s really big, you know, I’d probably have some problems building these on other types of RDAs, but in the goon, it literally took me maybe five minutes just because you could really lift those clamps up so well and it’s just going to house everything great. And now I’m going to also show you what it’s like when you squonk. If you wick it properly, you could see it just goes right up the center and absorbs exactly where you want it. It’s not going to anywhere you don’t want it to go. It’s not going to be overly messy unless you overdo it. It’s a great squonk mod and you can see this as being housed on the G- box, which is another item we carry. These are great, great affordable alternatives if you’re trying to squonk with dual battery.

So just to show you guys again , this is the black version, just to get you a close of the nice engravings. It’s a really, really solid RDA. All right guys, so thats going to be you’re up close Review of the 528 customs goon 25 millimeter RDA, which is going to be the newest one released by 528 customs. We’re really excited about this. Like I said, a lot of people have been asking us to do a video review about it because they’re excited and for good reason. I mean right off the bat you have your massive post systems, so you’d really have to try to find wire that you couldn’t fit in there. If you get a set of coils, you know you’re going to want to vape and you like them, they will fit in there and they’re going to work good. Another cool feature is you get an included squonk pin. So it’s not a separate purchase. If you’re in squonking, which is obviously a bottom feeding your liquid up to the top to avoid having to drip, It’s got that included too as well as an extra set of screws. So if you want to switch out the Starkey screws to the Phillips head like I do on mine, I find that more comfortable. You totally can and thats included into it. And then not to mention to the Delrin and top cap that is going to keep everything nice and cool. Just to kind of demonstrate. I’ll take a little hit off mine. I’m going to keep the air flow open all the way. And you see, I mean, this thing, it really does put out. And if you have the right set of coils in there, it’s a great experience. So just so you can see, I mean, those are some transformer coils. They’re powerful. That’s what the goons really awesome for. So like I said, we’re really excited about this guy. If you like the video, if you thought it was an informal, give us the like. If you’re interested in any of the products, including the G-box, they’re all available for purchase on our website. Discountvapepen.com.