No Smoke. No Battery. Just Vapor – The DynaVap “M” 2020

Dynavap M 2020

The latest innovation in smoke free vapor technology is here. The DynaVap “M” 2020 is a micro dosing vape. Unlike the vaporizers you’ve come to know and love, such as the devices sold on this website, the DynaVap “M” 2020 doesn’t have a battery at all.

At first glance, the DynaVap “M” 2020 looks like a fancy old school one-hitter with a cap. However, it is a much more complex device than that. The traditional one-hitter only requires that you pack in you herbal material and then put a flame to the open end and inhale, like a cigarette. This is what is know as the combustion method, because your materials are making direct contact with the heat source. The DynaVap “M” 2020 uses a conduction/convection method and the cap is the key to it all.

How To Use A DynaVap “M” 2020

  • First, remove the cap (known as the VapCap or Captive cap) and pack in your herbs.
  • Next, put the cap back on over the herbs. Don’t worry, the cap was designed to stay on regardless of what angle you’re holding the device.
  • Then, using a small torch lighter, heat the base of the cap while rotating the DynaVap “M” 2020. You will hear 2 clicks. The first indicates that the device is heating up and the 2nd click should indicate that it’s ready for you to take a rip.*

*Based on tests using this device, you will need to continue to heat the cap for another 3-5 seconds after you hear the 2nd click for it to truly be primed and ready for enjoyment.

Believe it or not the DynaVap “M” will produce an impressive amount of smooth vapor. Just to be clear, that’s vapor, not smoke that comes out. The VapCap is conducting the heat trapping it inside the chamber which will act as a tiny convection oven to effectively vaporize your material. The air flow, known as the “airports”, is designed in such a way so that you can take big, full rips and it keeps the stem from getting hot. There will be no ash when you’ve finished a session.

Another cool design feature of the DynaVap “M” 2020 is the 10mm tapered mouthpiece. For those of you who enjoy water pipes, you can slip the “M” right into your 10mm down-stem to use it instead of a bowl for a cool micro-dose. If you prefer to use concentrates, insert the DynaCoil into the tip of the “M”.

In short, the DynaVap “M” 2020 is a modern update to the traditional one-hitter pipe and is the perfect little tool to have in your arsenal. For more details check out the diagram and video below. To get your hands on one, CLICK HERE

 

DynaVap-m-guide