Auxo Cira E-Rig Kit – Premium Electric Dab Rig

The Auxo Cira is a premium electronic dab rig with precise temperature control from 450°F to 1000°F in 10-degree increments — giving you more control over your concentrate sessions than any preset-based device can match. Powered by Auxo’s proprietary Heating Wire Technology, the Cira delivers uniform heat across the chamber for consistent, balanced vapor with every session. The dual 2200mAh batteries support 30+ sessions on a single charge, recharging in approximately 60 minutes via the included zinc-alloy charging dock. The handblown borosilicate glass bubbler mouthpiece filters and cools vapor for smooth, flavorful draws, and the OLED display shows temperature and battery level at a glance. The kit ships complete with both a quartz and titanium heating chamber, carb cap, dab tool, and everything you need to start dabbing out of the box. Awarded Highest Rated in our Best Electric Dab Rig shortlist.

Precise Temperature Control — 450°F to 1000°F

Forget choosing between three or four preset heat levels. The Cira lets you dial in any temperature from 450°F to 1000°F, adjustable in 10°F increments using the +/– buttons. Low temps for terpene-rich flavor sessions, high temps for heavy clouds, and everything in between. The OLED display confirms your set temperature in real time so you always know exactly where you are.

Auxo Heating Wire Technology — Uniform Heat Distribution

The Cira uses Auxo’s proprietary Heating Wire Technology to deliver even, uniform heating across the entire chamber surface. This eliminates the hot spots and cold zones that cause uneven extraction in cheaper e-rigs, producing more consistent vapor quality and better flavor from your concentrates. The chamber heats up in approximately 20 seconds.

Two Heating Chambers Included — Quartz & Titanium

The kit includes both a quartz heating chamber and a titanium heating chamber, each with a 12.4mm inner diameter and 16mm outer diameter:

• Quartz: Pure, clean flavor with more even heat distribution. The flavor-forward choice — ideal for live resin, rosin, and terpene-focused sessions.
• Titanium: Faster heat-up and better heat retention. Harder-hitting vapor production — ideal for sharing sessions and heavier dabs.

Both chambers thread directly onto the Cira base. Auxo recommends replacing your chambers every 2–3 months depending on usage for best performance. Replacement chambers are available individually.

Extended Heating Mode — Unlimited 15-Second Extensions

Each standard session runs for 50 seconds. When the session enters its last 10 seconds, double-press the “+” button to extend heating for another 15 seconds at your current temperature. You can add as many 15-second extensions as you want — there’s no cap. If your dab isn’t finished or you’re sharing with friends, just keep extending until the chamber is cleared.

Glass Bubbler Mouthpiece — Water-Filtered Vapor

The included handblown borosilicate glass bubbler sits on top of the device, secured by three O-rings. Fill it with a small amount of water and inhale through the top — vapor passes through the water for cooling and filtration, delivering smoother, cooler hits than any dry mouthpiece. The carb cap sits on top of the glass piece, and the included silicone tether keeps it attached so you never lose it mid-session.

2200mAh Dual Battery — 30+ Sessions Per Charge

The Cira is powered by two batteries totaling 2200mAh — one of the largest battery capacities in the portable e-rig category. Expect 30+ standard sessions (50 seconds each) on a full charge. Recharge in approximately 60 minutes using the included zinc-alloy charging dock and charger kit. You can also plug the cable directly into the device for portable charging, and pass-through charging lets you dab while the Cira charges.

Ergonomic Anti-Scalding Design

The Cira’s aluminum-alloy chassis features a distinctive wave texture on top that serves two purposes: it provides a comfortable, non-slip grip, and it acts as a heat barrier to prevent the housing from getting uncomfortably warm during high-temperature sessions. At 5.1″ x 3.0″ x 2.3″ and 340g (without glass), the Cira has a small footprint for an e-rig and fits comfortably in one hand.

How to Use the Auxo Cira

Press and hold the power button for two seconds to turn on. Use +/– to set your desired temperature. Thread a heating chamber onto the base and load a small dab using the included dab tool. Secure the glass bubbler and carb cap. Double-press the power button to start the heating cycle. Place the carb cap on top and inhale from the mouthpiece when the device reaches temperature. The device auto-shuts off after 10 minutes of inactivity.

Auxo Cira Quick Links

• Replacement Glass Mouthpiece Kit
• Quartz Heating Chamber
• Titanium Heating Chamber
• Charger Kit (Cable + Wall Adapter)
• Charging Dock (Base Only)

Browse more electric dab rigs or explore wax and dab vaporizers at Discount Vape Pen.

Package Contents

• 1x Auxo Cira E-Rig Device
• 1x Handblown Glass Bubbler Mouthpiece
• 1x Quartz Heating Chamber
• 1x Titanium Heating Chamber
• 1x Zinc-Alloy Charging Dock
• 1x USB Charging Cable
• 1x USB Wall Power Adapter
• 1x Dab Tool
• 1x Carb Cap
• 1x Silicone Tether
• 5x Cotton Cleaning Swabs

Note: Concentrates sold separately. The Cira is designed for concentrates only — not compatible with dry herb. Glass bubbler and accessories are not covered under Auxo’s 2-year limited device warranty. Proprietary charging cable — standard USB-C cables are not compatible.